E-FLITE Sobre 3D Profile, Инструкция по сборке, Страница: 3 / 32

3 E-flite Sobré 3D Profile Assembly Manual
Contents of Kit/Parts Layout
Small Replacement Parts
EFL1101 Pushrods
EFL1102 Carbon Fiber Stiffeners
EFL2305 Wheel Pants
EFL2306 Firewall Mount w/Hardware
EFL2309 Landing Gear
EFLA200 Micro Control Horns
EFLA203 Micro Control Connectors
EFLA221 Foam Park Wheels, 1.5-inch
Required Radio Equipment
You will need a minimum 6-channel transmitter (for proper
mixing and dual rate capabilities), crystals, micro receiver, and
four sub-micro servos. You can choose to purchase a complete
radio system that includes all of these items or, if you are using
an existing transmitter, just purchase the other required equipment
separately. We recommend the crystal-free, interference-free
Spektrum ™ DX6 2.4GHz DSM ® 6-channel system, which includes
a micro receiver and 4 sub-micro 7.5-gram servos. If using
your own transmitter, we recommend the use of a JR SPORT ™
6-channel UltraLite receiver and E-flite ® S60 Super Sub-Micro
servos.
If you own the Spektrum DX7 radio, just add the AR6100
DSM2 ® 6-channel receiver and four of our E-flite S60 Super
6-gram Sub-Micro servos (EFLRS60).
Complete Radio System
SPM2460 DX6 DSM ® 6CH Park Flyer w/4-S75
Or Purchase Separately
JSP30610 6-Channel UltraLite Rx w/o Crystal, Positive Shift
JR/AIR (72MHz)
JSP30615 6-Channel UltraLite Rx w/o Crystal, Negative
Shift Fut/HRC (72MHz)
JRPXFR** FM Receiver Crystal (JR only,
not Spektrum receivers)
Or
SPM6000 AR6000 DSM 6CH Park Flyer Receiver
Or
SPM6100 AR6100 DSM2 6CH Rx (for DX7 only)
And
EFLRS60 6.0-Gram Super Sub-Micro Servo (4)
(5th servo with optional Variable Pitch Propeller,
S75 servo required)