16
E-flite S.E.5a Slow Flyer ARF Assembly Manual
9. Position the outer strut between the top and bottom
wings as shown. Use foam-safe CA to glue the outer strut
to the top and bottom wings.
10. Repeat Steps 8 and 9 to install the remaining outer
strut between the top and bottom wings.
Attach the Fin and Stabilizer
Required Parts
• Rudder/Fin
• Elevator/Stabilizer
• Micro control horn (2)
• Micro control horn backplate (2)
Required Tools and Adhesives
• Square
• Foam-safe CA
• Sandpaper
1. Position the rudder/fin tab into the slot in the
stabilizer/elevator. The green side of the stabilizer/
elevator faces the rudder/fin. Use a square and foam-
safe CA to glue the two items together, making sure the
rudder/fin is square to the stabilizer/elevator.