14
E-flite S.E.5a Slow Flyer ARF Assembly Manual
2. Position and center the bottom wing on the
fuselage. Use a felt-tipped pen to mark the location for
ONE of the wing mounting screws at this time.
3. Use a pin drill and 1/16-inch (1.5mm) drill bit to
drill a hole for the wing mounting screw marked in the
previous step.
4. Use a #2 x 5/8-inch sheet metal screw and #1
Phillips screwdriver to temporarily attach the wing to the
fuselage. Using one screw will allow you to align the
bottom wing as described in the following steps.
