27
E-flite S.E.5a Slow Flyer ARF Assembly Manual
17. From the fuselage, run the rigging up to the upper
front hole in the outer strut.
18. Apply light tension on all the rigging at this time. Use
foam-safe CA to glue the end of the rigging in position
once the rigging has been tensioned. Once again take
a look and ensure there are no warps in the two wings.
Using a hobby knife, trim off the remaining thread once
the CA has cured.
19. To complete the rigging of your model, go back and
apply a drop of foam-safe CA to each position where the
rigging passes through a strut and through the fuselage.
