28
E-flite Piper Pawnee ARF Assembly Manual
11. Slide the three hinges into the slots in the elevator.
12. Slide the elevator into position on the stabilizer. The
T-pins installed in the hinges will help in keeping equal
amounts in the stabilizer and elevator.
13. Align the elevator with the tip of the stabilizer so they
do not bind during operation. Apply a few drops onto
each hinge. Make sure to apply the CA on both the top
and bottom of the hinge.
Important
: Do not use accelerator on the hinges. The CA
must be allowed to soak in and penetrate the hinge.
14. Gently pull the elevator from the stabilizer once
the CA has fully cured. This is to verify the hinges are
glued securely.
