24
E-flite Piper Pawnee ARF Assembly Manual
7. Apply a coat of epoxy to the root rib of one of the
wing panels.
8. Apply epoxy inside the joiner box of the wing panel.
9. Slide the joiner into the wing panel and clean up any
excess epoxy using a paper towel and rubbing alcohol.
Use enough epoxy that is flows out of the joiner pocket
when the joiner is inserted. Repeat Steps 6 through 8 and
quickly proceed to the next step.
10. Use a clamp at the front of the wing and low-tack
tape to hold the wing panels tightly together until the
epoxy fully cures.
