16
E-flite Piper Pawnee ARF Assembly Manual
14. Use side cutters to remove the backplate from
a control horn. Attach the clevis to the outer hole
of the horn.
15. Position the control horn so a) the holes in the
horn align with the hinge line and b) the pushrod is
90 degrees to the hinge line. Use a felt-tipped pen
to transfer the locations for the two mounting screws
onto the aileron.
16. Use a drill and 5/64-inch (2mm) drill bit to drill the
two holes for the aileron control mounting screws.
17. Apply a few drops of thin CA to each of the
holes drilled in the previous step to harden the
surrounding wood.
