9
E-flite Deuces Wild Assembly Manual
2. Slide the threaded rods from the fin into the holes in
the stabilizer. The fin will fit flush against the stabilizer
when installed.
3. Slide the threaded rods into the holes in the rear
of the fuselage.
4. Using a 1/4-inch nut driver, secure the tail assembly
to the fuselage using two 4-40 lock nuts and two #4
washers. Do not over-tighten the nuts and damage the
fuselage. At this time the Rudder/Fin, Stab/Elevator, and
Fuselage should fit tight against each other.
Содержание Deuces Wild ARF
Страница 25: ...25 E flite Deuces Wild Assembly Manual Half Flap Full Flap...
Страница 67: ...67 E flite Deuces Wild Assembly Manual...