16
E-flite Deuces Wild Assembly Manual
Aileron Servo Installation
Required Parts
Wing panel (right and left)
Servo hatch (right and left)
Servo mounting block (4)
Servo w/hardware (2)
Nylon clevis (2)
Silicone clevis retainer (2)
Nylon pushrod keeper (2)
2mm x 10mm self-tapping screw (8)
4 1/4-inch (108mm) aileron pushrod wire (2)
Required Tools and Adhesives
Pencil
6-minute epoxy
Drill
Pin drill
Phillips screwdriver: #1
Thin CA
Felt-tipped pen
Pliers
Mixing cups
Mixing sticks
Side cutters
Sandpaper
Drill bit: 1/16-inch (1.5mm), 5/64-inch (2mm)
1. Use sandpaper to roughen the ends of the four servo
mounting blocks. Doing so will allow the epoxy applied
to them in the next step a better surface to adhere to.
2. Use 6-minute epoxy to secure the servo mounting
blocks on the servo hatch. The positions for the blocks
have been etched onto the hatch for your convenience.
Содержание Deuces Wild ARF
Страница 25: ...25 E flite Deuces Wild Assembly Manual Half Flap Full Flap...
Страница 67: ...67 E flite Deuces Wild Assembly Manual...