![background image](http://html1.mh-extra.com/html/latrax/alias/alias_start-manual_3813050001.webp)
1
QUICK START GUIDE
INTRODUCTION
Thank you for purchasing the LaTrax Alias quad rotor high-performance helicopter. We know you’re excited about
getting your new model in the air, but it’s very important that you take some time to read through this Quick Start Guide
and the included Owner’s Manual. Both contain the instructions you will need to operate and maintain your model so
that you can enjoy it for years to come.
Read and follow all warnings, precautions, and instructions to ensure safe operation. Failure to operate your model in a
safe and responsible manner may result in property damage and serious injury.
You alone are responsible for ensuring
that all instructions and precautions are adhered to.
1. CHARGE THE BATTERY PACK
Plug the charger into a USB port. For the best charging performance, use a USB wall adapter rated at 1 amp or greater
output. Plug the battery into the charger. Charge time is approximately 40 minutes on the
Fast
charge setting. Some
computer USB ports will not support fast charging. If you experience problems, switch to the
Normal
charge setting.
WARNING! It is critical to follow all instructions for safe and proper use, charging, and storage of LiPo batteries.
See the included Owner’s Manual for more information.
2. INSTALL THE TRANSMITTER BATTERIES
Disconnected
Charging
Charged
1.
2.
3.
4. TURN ON THE HELICOPTER
Install the fully charged battery into the
helicopter and connect the battery (A).
The rear-facing LED on the helicopter will
glow solid blue indicating that the helicopter
is powered on and linked to the transmitter (B).
Route the battery wire under the body and insert
the plug into the battery plug retainer (C).
AAA x 4
3. TURN ON THE TRANSMITTER
The transmitter will emit a rising musical tone.
Always turn the transmitter on first, before
connecting the helicopter battery.
40
B.
C.
A.
• The included LiPo battery pack must be charged ONLY with the USB charger included with the model. Failure to use the correct charger
may result in battery damage, fire, personal injury, and/or property damage. DO NOT use a charger designed for NiCad or NiMH batteries.
• Charge the battery in a safe area away from flammable materials. Monitor the charging process and never leave batteries unattended
while charging. Do not allow small children to charge or handle LiPo batteries.
• Do not use or charge battery packs that have been damaged in any way (bent, dented, swollen, torn covering, or otherwise damaged).
KC1828-R02-Alias-Quickstart-140430.indd 1
4/30/14 5:38 PM