6
E-flite Deuces Wild Assembly Manual
2. Position the elevator servo in the fuselage. Use a pencil
to transfer the locations for the servo mounting screws to
the servo tray.
3. Use a pin drill and 1/16-inch (1.5mm) drill bit to drill
the four holes for the servo mounting screws.
4. Apply 2–3 drops of thin CA into each of the holes to
harden the surrounding wood. This will provide a harder
surface for the screws to bite into when installed.
5. Secure the elevator servo in the fuselage using
the hardware provided with the servo and a #1
Phillips screwdriver.
Содержание Deuces Wild ARF
Страница 25: ...25 E flite Deuces Wild Assembly Manual Half Flap Full Flap...
Страница 67: ...67 E flite Deuces Wild Assembly Manual...