41
E-flite Deuces Wild Assembly Manual
Hint
: Cut the string routed through the wing into two
pieces and tape them to the wing as shown to keep them
out of the way during the retract servo install.
2. Position the retract servo in the wing. Use a pencil to
transfer the locations for the servo mounting screws to the
servo tray.
3. Use a pin drill and 1/16-inch (1.5mm) drill bit to drill
the four holes for the servo mounting screws.
4. Apply 2–3 drops of thin CA into each of the holes to
harden the surrounding wood. This will provide a harder
surface for the screws to bite into when installed.
Содержание Deuces Wild ARF
Страница 25: ...25 E flite Deuces Wild Assembly Manual Half Flap Full Flap...
Страница 67: ...67 E flite Deuces Wild Assembly Manual...