Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
8
2
2
2
Rod (2.5x300mm)
TP Screw (2.3x12mm)
Servo tray(70x58x2mm)
Pin hinge(4.5X67mm)
10
Install the aileron servo to the servo mount as
illustration below.
1mm
Trailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Aileron
Collar (2.5mm)
4
2
2
2
Screw (3x16mm)
Nut (3mm )
Clevis
Control horn
8
Pin hinge(4.5x67mm)
Make sure hinges are
mounted in the same line.
Install the nylon control horn and connect the linkage.
Apply instant type AB glue to appropriate position in the
trailing edge and assemble the ailerons to them.
Apply instant type AB glue to appropriate position of the aileron and
pivot & round hinges. Insert the pivot & round hinges to the ailerons.
Keep about 1mm width space between the aileron and
the trailing edge.
Accessory list for the coming installation steps.
1
2
3
4
5
3
Glue the PVC parts to appropriate position on the cockpit.
The sketch map once the landing gear assemble completion.
Fix the landing gear to the fuselage with screws from the fuselage as illustration.
Trim the PVC parts along the shaded line.
Screw (6x15mm)
Washer (6x12mm)
Glue the PVC parts to appropriate position on the cockpit.
86
18
82
83
85
84