B
C
B ’
A
A ’
C ’
A = A '
B = B '
C = C '
The sketch map when the upper wing assemble completion.
Assemble the wing strut as illustration.
Please adjust to the right position before epoxy
the wing skids into the slots in the wings!
Fix the lower wing to fuselage with screws throught the
holes applied in the wings and fuselage.
Accessory list for the coming installation steps.
Screw
Washer
2
Washer (6x12mm)
2
Screw (6x35mm)
2
Washer (6x12mm)
2
Screw (6x45mm)
Washer(3x6mm)
Nut (3mm)
Steel wire(0.5x900mm)
34
34
Screw (3x10mm)
4
Aluminum plate
1
Upper wing joiner (25x1135mm)
2
Wing skids
2
Wing skids
2
Wing skids
16
2
Wing skids
2
Wing skids
2
Wing skids
8
16
Aluminum tube
1
Upper wing joiner (25x1135mm)
Assemble the upper wings to the upper centre wing.
Adjust the wing strut between the upper wing and lower
wing, epoxy the wing skids to slots in the upper wings.
11
14
13
12
15
5
Fuel supply line
Fuel spray line
Air pressure line
Assembly of the fuel tank.
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Set screw (3x4mm)
Washer (2mm)
Set screw (3x4mm)
1
1
1
1
Install the servo of the throttle.
Assenble the servo in the fuselage
Epoxy the oil tank mounts to appropriate position in the fuselage.
4
Oil tank mount
Before you fix the oil tank mount, please measure the
sizes and make sure it can held the oil tank well!
cable tie
cable tie
Fix the fuel tank to appropriate position in the fuselage
with cable tie.
cable tie
2
Mount the receiver and battery to appropriate position in
the fuselage.
73
74
71
75
76
16
72
