0
Note: For safety, disconnect both main motor plugs from the -in-1 control unit (as shown on page 1)
before proceeding. Once the binding process is complete and the flight battery is unplugged from the
-in-1 unit, reconnect the main motor plugs to -in-1 unit (as noted on page 19).
•. In.order.to.bind.the.4-in-1.control.unit’s.receiver.to.the.transmitter,.you.must.first.insert.the.Bind.Plug.(included.
with.your.Blade™.CX2.and.replacement.4-in-1.control.units).into.the.“BAT”.opening.on.the.receiver ..Then.you.will.
need.to.power.on.the.4-in-1.control.unit.by.connecting.the.flight.battery.BEFORE.powering.the.transmitter.on .
•. When.you.connect.the.flight.battery.to.the.4-in-1.unit.with.the.bind.plug.inserted.into.the.“BAT”.opening.on.the.
receiver,.you.will.see.an.orange.LED.blink.rapidly.on.the.receiver.itself .
•. Once.the.orange.LED.on.the.receiver.begins.to.blink,.turn.on.the.transmitter ..The.transmitter.will.immediately.
enter.bind.mode ..Then,.once.the.orange.LED.on.the.receiver.and.the.red.LED.on.the.transmitter.turn.solid,.the.
4-in-1.unit’s.receiver.is.bound.to.the.transmitter ..Now.you.will.need.to.power.down.the.4-in-1.control.unit.and.
transmitter,.and.remove.the.bind.plug.from.the.receiver .
Note: It is extremely important that you remove the bind plug from the receiver once it has been bound
to the transmitter. If you do not remove the bind plug, the receiver will enter bind mode every time the
-in-1 unit is powered on.