6
7
Receiver Connection and Installation
A 6-channel or greater micro receiver is required . We strongly recommend the use of a DSM (Digital Spectrum
Modulation) equipped receiver (like the Spektrum AR6100) and transmitter on 2 .4GHz (like the Spektrum DX6i
or DX7) for the ultimate in glitch-free performance . However, if you will be using a 72MHz radio system, we
recommend the use of a PCM receiver .
The following steps outline connection and installation of the receiver:
• Apply one or two sections of the included two-sided tape on your chosen receiver. Be sure to leave the paper
backing that remains on the other side of the tape in place until after completing the next step .
• Locate the wire leads/connectors located near the front of the main frame. While it is possible to connect these
leads/connectors to the receiver after it’s been installed, it is easier to connect them to the receiver before
installing it on the helicopter . Please see the following lists and illustrations, while also referring to the manual
for your transmitter, for proper connections:
For JR and Spektrum Transmitters/Receivers
Channel 1 (THRO)
2-in-1Control Unit ‘THRO’ (Throttle) lead
Channel 2 (AILE)
Right mounted swashplate control ‘aileron’ servo lead
Channel 3 (ELEV)
Front-mounted swashplate control ‘elevator’ servo lead
Channel 4 (RUDD)
Gyro ‘rudder’ lead
Channel 5 (GEAR)
Gyro ‘auxiliary’ lead (the single yellow wire lead)
Channel 6 (AUX1)
Left mounted swashplate control ‘pitch’ servo lead
For Futaba and Hitec Transmitters/Receivers
Channel 1 (AILE)
Right mounted swashplate control ‘aileron’ servo lead
Channel 2 (ELEV)
Forward-mounted swashplate control ‘elevator’ servo lead
Channel 3 (THRO)
2-in-1Control Unit ‘THRO’ (Throttle) lead
Channel 4 (RUDD)
Gyro ‘rudder’ lead
Channel 5 (GEAR)
Gyro ‘auxiliary’ lead (the single yellow wire lead)
Channel 6 (AUX1)
Left mounted swashplate control ‘pitch’ servo lead
Aileron (CH1)
Elevator (CH2)
Throttle (CH3)
Rudder (CH4)
Pitch (CH6)
Gyro
ESC
Gear (CH5)
Gyro Aux (Optional)
6-Channel
Receiver
Futaba and Hitec Receiver Connections
Throttle (CH1)
Aileron (CH2)
Elevator (CH3)
Rudder (CH4)
Pitch (CH6)
Gyro
ESC
Gear (CH5)
Gyro Aux (Optional)
6-Channel
Receiver
JR and Spektrum Receiver Connections
Содержание Blade CP Pro 2 PNP
Страница 36: ...70 71 NOTES NOTES ...