38
39
Moving the stick to the right will roll the helicopter to the right, allowing the helicopter to be flown to the right .
The aileron trim can be used to help keep the helicopter from drifting left or right when in hover with no aileron
stick input . For example, if the helicopter drifts to the right when in hover, add left aileron trim until the helicopter
hovers as level as possible with no drifting to the right .
Once you’re familiar with the primary controls of the helicopter, you are almost ready to fly .
Dual Rates
Depending on the transmitter and settings you use, your Blade CP Pro 2 can be fine tuned by simply flipping the
dual rate switch . This switch allows the pilot to toggle between the high and low control rates available for the
aileron, elevator and rudder channels (depending on the transmitter and settings you have chosen) .
Helicopter Moves Right
Mode 2
Mode 1
Pulling the stick backward will pitch the tail of the helicopter downward, allowing the helicopter to be flown
backward .
The elevator trim can be used to help keep the helicopter from drifting forward or backward when in hover with
no elevator stick input . For example, if the helicopter drifts forward when in hover, pull the elevator trim downward
until the helicopter hovers as level as possible with no forward drifting .
Moving the stick to the left will roll the helicopter to the left, allowing the helicopter to be flown to the left .
Mode 2
Mode 1
Helicopter Moves Backward
Mode 2
Mode 1
Helicopter Moves Left
Содержание Blade CP Pro 2 PNP
Страница 36: ...70 71 NOTES NOTES ...