User Manual EE431
Duct and Immersion Temperature Sensor | 6
3.2 Dimensions
3.2.1. EE431 Duct and Immersion Temperature Sensor
Values in mm (inch)
Temperature sensor
Cable gland M16x1.5
38 (1.5)
20 (0.8)
80.8 (3.18)
63 (2.48)
Ø4
(0.16)
42 (1.65)
Optional display
55.3 (2.18)
Cable gland M12x1.5
(only for RS485)
Ø6 (0.24)
L
1)
39.5 (1.56)
55.3 (2.18)
1)
Length
in mm
Length
in inch
65
2.56
115
4.53
150
5.91
300
11.81
Mounting accessories
Mounting flange
(not included in the scope of supply)
Immersion well
(not included in the scope of supply)
56 (2.2)
Ø > 9
(0.35)
Ø 5 (0.2)
Ø8
(0.31)
L
2)
8
(0.31)
Width across flats:
22 (0.87)
14
(0.55)
2)
Length
in mm
Length
in inch
50
1.97
100
3.94
135
5.31
285
11.22
3.3 Electrical Connection
EE431 features screw terminals for connecting the power supply and the outputs. Insert the cables into the
enclosure through the M16 cable gland.
NOTICE
It is important to make sure that the cable glands are closed tightly. This is necessary for assuring the IP
rating of the enclosure according to EE431 specification, as well as for stress relief at the screw terminals on
the EE431 board.
