service manual
Issued 05/05
42
Fitting notes
Firmly pull the FDC seal off the base of the
cyclone assembly.
When refitting the FDC seal ensure the top of
the seal covers all the ribs on the base of the
cyclone assembly.
Prise the bin base assembly away from the
base of the bin until it detaches.
To refit the bin base assembly, position one
of the locating tabs into one side of the retainer.
Then press the other side firmly until it clips into
position.
Cyclone and bin assemblies
198
199
200
Align the sides of the lower cable winder
with the channels on the inside of the duct.
Slide onto the duct until the release catches
lock into place.
Refit the duct/valve seal onto the side of
the duct. Note: the side with the ridge faces
outwards.
202
203
Assembling the duct assembly
Fit the spring onto the cruciform on the
cyclone release catch. Clip one leg of the
catch into the retainer on the duct. Twist the
other leg into the duct.
201
Содержание DC15
Страница 1: ...Issued 05 05 service manual...
