Dyson DC15, Руководство по обслуживанию

Страница: 47 / 51

service manual
Issued 05/05
44
Fitting notes
Once you have fitted all the previous parts
to the duct, you should continue to fit the
following main assemblies in order as
previously shown:
valve assembly, (pages 34-35)
stabiliser and axlestand, (pages 29-31)
motor bucket and ball, (pages. 26-27)
Align the locators on the post filter cover
assembly with the retainers on the duct. Lower
the post filter cover assembly onto the duct until
the three catches, including the one on the rear
lock into place.
Fit the cyclone and bin assembly onto the post
filter cover assembly. Fit the hose/u-bend
assembly into the rear of the duct. Slide the
wand handle assembly into the hose until it
clicks into place. Then slide the wand handle
assembly into the top of the duct.
Once the previous main assemblies are fitted,
you should continue to fit the following parts:
internal cable and PCB assembly, (page 38)
PCB to yoke loom, (page 39)
powercord assembly and switches, (pages 36-37)
cleanerhead, (pages 19-20)
210