Dyson DC15, Руководство по обслуживанию

Страница: 20 / 51

service manual
Issued 05/05
Slide the hose guard into the channels on
the side of the yoke until the release catch clips
into position.
64
17
Fitting notes
Assembling and refitting the yoke assembly
Place the actuator arm spring onto the
actuator arm. Using a thin flat bladed
screwdriver, position the other end of the spring
between the two retainers inside the gimble lock
arm.
Lower the gimble lock arm spring into the
gimble lock arm assembly.
Clip the other end of the gimble lock arm
assembly into the side of the yoke.
Carefully press the gimble lock arm spring
and the actuator arm into the yoke. Press the
gimble lock arm assembly onto the yoke.
Position the hole on the side of the gimble
lock arm assembly onto the yoke.
61
62
63 60
59