Dyson DC15, Руководство по обслуживанию

Страница: 44 / 51

service manual
Issued 05/05
Peel the u-bend seal off the end of the
u-bend.
When refitting the u-bend seal, ensure it locates
over the rib highlighted.
41
Fitting notes
Hose/u-bend and wand assemblies
Peel the duct valve seal off the side of the
duct.
Release both catches on the front of the
lower cable winder. Slide the lower cable
winder off the rear of the duct.
Press both hose release catches and slide
the wand handle assembly out of the hose/u-
bend assembly.
Push the wand catch backwards until it
releases from the wand handle assembly.
To refit, push both locators on the catch into the
retainers on the wand handle assembly.
197
192 195
196
193
Twist the cyclone release catch out of the
duct. Remove the cyclone release catch spring.
194