HCLR-1400
18
Fourth step - trimming of the poll
To trim the top of the head, direct the blades from
the nape towards the front so as to cut against the
growth direction of the hair. Sometimes – e.g. at
so called coils - this requires changing the cutting
direction from the front towards the nape.
For longer hair, use the accessory comb to lift hair
on the crown of the head. Trim the amount of hair
lifted above the comb or lift hair with two fingers
and cut to the length intended.
Whilst clipping, comb out shaved hair from time to time and
check for unevenness; correct, if necessary.
Fifth step - last phase of hair trimming
At the end of the hair-cut, use the hair clipper
without the comb attachment in order to trim any
hairs remaining on the bottom of the neck, at its
side and around the ears.
To do this, set the three-way switch of the device into its upper
(adjustment) position.
In order to achieve a straight trim of a side curl, use the hair
clippers in vertical direction, with the cutting blades upward.
User'sManual for HCLR-1400.indd 18
User'sManual for HCLR-1400.indd 18
2015.12.06. 14:41:12
2015.12.06. 14:41:12