EN
HCLR-1400
17
Start trimming in the middle of the nape of the neck from below
and move the trimmer upwards.
Hold the hair clipper gently in your hand and push it slightly
against the head directing the teeth of the comb attachment
upwards.
Lift the hair clipper slowly, moving the teeth of the comb
attachment upwards and away from the nape of the neck
through the hair. Cut only a small amount of hair at once.
Lift the hair clipper blades bit-by-bit, outwards from the bend of
the nape of the neck.
Continue to trim the hair on the nape of the neck upwards from
the lower part of the neck to the ears.
Second step - cutting the back of the head
Change the setting of the comb attachment when
the device has been switched off if necessary, then
trim the nape of the neck and the back of the head.
Third step - cutting the hair from the sides of the head
Change the setting of the comb attachment when
the device has been switched off and continue
trimming towards the hair on the side of the head.
User'sManual for HCLR-1400.indd 17
User'sManual for HCLR-1400.indd 17
2015.12.06. 14:41:12
2015.12.06. 14:41:12