EN
HCLR-1400
13
1. Push the comb attachment locking button to its
unlock position (UNLOCK), then pull the comb
attachment from the device. Next, remove the
blade unit by supporting its knurled side with
your thumb, and pushing its edge outwards
with your thumb as shown on the figure.
2. By gently pushing the white plastic element
support and moving the internal blade of
the blade unit in the direction of the arrow,
you can slightly open the blade profiles. Add
1-2 drops of oil between profiles. Use only
the oil supplied in the oil can or failing this,
an acid-free instrument oil.
Do not use hair oil, machine grease, mixed oil or solvent for
blade lubrication. Solvents remove and wash away the thin oil
film from the blades, which will impair their performance and
increase wear. When cleaning the blades, be extremely careful
not to damage the blade drive mechanism; our warranty does
not cover any damage caused during cleaning operations.
3. Replace the blade unit into the device. Align the
plastic pin on its base with the groove at the
rear side of the blade holder from above, then
User'sManual for HCLR-1400.indd 13
User'sManual for HCLR-1400.indd 13
2015.12.06. 14:41:12
2015.12.06. 14:41:12