EN
HCLR-1400
11
voltage where you’re using the appliance corresponds to
the value shown on the nameplate of the appliance.
When plugging in, plug the power cable first into the
device socket and then into the wall socket.
Charging the device battery
• The device is battery powered. The battery cell cannot be
removed, even for charging purposes. The device includes an
electronic battery charging function. In order to ensure full
availability of the battery cell, a “formatting” operation must
be carried out before first using the device:
• For a new device, the battery cell is partially pre-charged. First
switch on the device to fully discharge the battery. To do this,
push the 3-way switch down to the clipping position (CUT).
Keep the device switched on until its motor stops then return
the switch to the central position
• Afterwards, immediately plug the power cable first into the
device’s socket and secondly into the mains socket and charge
the battery for 20 hours. Whilst charging the pilot light will
stay on.
• After charging the device, repeat the formatting procedure, ie
full discharging and 20 hour recharging cycle, twice.
User'sManual for HCLR-1400.indd 11
User'sManual for HCLR-1400.indd 11
2015.12.06. 14:41:12
2015.12.06. 14:41:12