SkyView SE
Pilot’s User Guide
- Revision B
5-3
•
The POWR/ECO widget will turn green and
display “ECO mode” when the engine is running
economically. In this mode you will experience reduced fuel consumption.
•
When the engine is off, the THRTL widget will show a green range to assist cold-start
scenarios. Note that both lane switches and start power must be on in order to display the
throttle position widget.
See your Rotax manual for more information.
SkyView SE can be configured to adjust the oil temperature and tachometer gauges for the
Rotax 912 engine dynamically to reflect limitations that Rotax specifies for that engine. When
this behavior is turned on (per the SkyView / SkyView SE System Installation Guide), the
tachometer and oil temperature behave in the following ways:
Tachometer for Rotax 912:
When OIL TEMP < 120ºF, the TACHOMETER displays these ranges:
•
0-1400
and
4000-6000 RPM in RED
•
1400-1800
and
2500-4000 RPM in YELLOW
•
1800-2500 RPM in GREEN
When OIL TEMP > 120ºF, the TACHOMETER displays
different
ranges:
•
0-1400
and
5800-6000 RPM in RED
•
1400-1800
and
5500-5800 RPM in YELLOW
•
1800-5500 RPM in GREEN
The alarm type for the tachometer is the “
self-clearing
” type.
Oil Temperature Gauge for Rotax 912:
When OIL TEMP < 190ºF, the OIL TEMP gauge displays these ranges:
•
100-120 and 230-266ºF in YELLOW
•
120-190ºF in GREEN
if OIL TEMP has bee
n above 190ºF “more recently” than OIL TEMP was
below 120ºF;
otherwise 120-190ºF is displayed in BLACK OUTLINED IN WHITE
•
190-230ºF in GREEN
•
266-280ºF in RED.
When OIL TEMP is > 190ºF, the OIL TEMP gauge will display
different
ranges:
•
100-120
and
230-266ºF in YELLOW
•
120-230ºF in GREEN
•
266-280ºF in RED
The alarm type for oil temperature is the “
self-clearing
” type.
