background image

Dynatron 900

+™

 

 

26 

D

YNATRON 

900+

™   

 

LIMITED WARRANTY

 

 

Dynatronics CORPORATION warrants the Dynatron 900+, to be free from factory defects in materials and workmanship 
under normal use for ONE YEAR from the date of purchase by the original owner.  If this product is defective within the 
warranty period, Dynatronics will, subject to the conditions set forth below: 

 

(1)  repair or replace defective parts at no charge within a reasonable period of time with new or remanufactured parts, at 
Dynatronics

’ option; and 

 

(2)  provide labor for the repair or replacement of defective parts under this warranty without charge. 

 

Parts  used  for  replacement  under  this  warranty  are  warranted  for  the  remainder  of  the  original  warranty  period.    THE 
REPAIR OR REPLACEMENT OF DEFECTIVE PARTS SHALL CONSTITUTE THE SOLE AND EXCLUSIVE REMEDY IN 
THE EVENT OF A BREACH OF WARRANTY. 

 

REGISTRATION  REQUIRED.    In  order  for  this  warranty  to  be  valid,  the  warranty  registration  card  (included  with  the 
product) must be filled out and returned to Dynatronics within 30 days of purchase by the original owner.  A copy of an 
invoice or receipt may be requested to verify purchase date. 

 

REPAIRS.  All repairs must be performed by an authorized service facility.  Any modifications or repairs by unauthorized 
parties will void this warranty. 

 

OBTAINING  WARRANTY  SERVICE.    Authorization  by  Dynatronics  is  required  before  obtaining  service  under  this 
warranty.  Therefore, before shipping or delivering this product to an authorized service facility for warranty service, call 
Dynatronics and obtain a return authorization number. 

 

PACKAGING AND SHIPPING.  Any device shipped to an authorized service facility for service under this warranty must 
be in the original shipping carton, freight prepaid, fully insured, and properly packed to prevent damage.   Dynatronics is 
not liable for any damage to the device while in transit.  Include a summary of the problem with the product.  Write the 
return authorization number obtained from Dynatronics on the shipping label. 

 

SHIPPING  COSTS.    Within  the  first  30  days  of  the  warranty  period,  Dynatronics  will  pay  all  necessary  shipping  costs 
associated  with  obtaining  service  under  this  warranty.    After  the  first  30  days  of  the  warranty  period,  the  owner  is 
responsible  for  all  costs  associated  with  shipping  the  product  to  an  authorized  service  facility.    Dynatronics  will  pay  all 
costs associated with shipping the product back to the owner after service is completed, and will ship the product using 
the same carrier or type of carrier and service that was used by the owner for the incoming shipment. 

 

EXCLUSIONS.  Any defect, malfunction or failure caused by or resulting from improper installation, service, maintenance 
or repair, or from abuse, neglect, transportation, accident, act of God, or other cause beyond the control of  Dynatronics 
will  not  be  covered  by  this  limited  warranty.    ANY  IMPLIED  WARRANTIES  COVERING THIS  PRODUCT,  INCLUDING 
BUT  NOT  LIMITED  TO  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE,  ARE 
LIMITED IN DURATION TO ONE YEAR FROM THE DATE OF PURCHASE BY THE ORIGINAL OWNER.   Dynatronics 
SHALL  NOT  IN  ANY  CASE  BE  LIABLE  FOR  SPECIAL,  INCIDENTAL,  CONSEQUENTIAL,  INDIRECT,  OR  OTHER 
SIMILAR  DAMAGES  ARISING  FROM  BREACH  OF  WARRANTY,  BREACH  OF  CONTRACT,  NEGLIGENCE,  OR  ANY 
OTHER  LEGAL  THEORY  EVEN  IF  Dynatronics  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH  DAMAGES.  
SOME  STATES  DO  NOT  ALLOW  LIMITATIONS  ON  HOW  LONG  AN  IMPLIED  WARRANTY  LASTS  OR  THE 
EXCLUSION  OR  LIMITATION  OF  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES,  SO  THE  ABOVE  LIMITATION  OR 
EXCLUSION MAY NOT APPLY TO YOU.  THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  MAY 
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 

 

For more information concerning repairs, operation, or technical assistance, please contact the Dynatronics dealer 
nearest you, or contact Dynatronics directly at: the address below. 

 
 
 

 
 
 
 
 
Dynatronics Corporation

 

7030 Park Centre Drive  •  Salt Lake City, Utah  84121  •  (801)  568-7000  (800)  874-6251 

Содержание 900+

































Отзывы: