Dynatron 900+, Руководство оператора

Страница: 29 / 32

Dynatron 900
+™
25
Table 4
ADDITIONAL TECHNICAL INFORMATION AVAILABLE
(
FOR TECHNICIANS ONLY
)
Dynatronics will make available on request circuit block diagrams, component part lists,
descriptions, calibration instructions or other information which will assist the user’s appropriately
qualified technical personnel to repair those parts of the equipment which are designated by
Dynatronics as repairable and which will not violate protection of Dynatronics’ proprietary
information..
Recommended separation distance between portable and mobile RF communications
equipment
and the Dynatron 900+ (and accessories)
The Dynatron 900+ (and accessories) is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the Dynatron 900+ (and accessories) can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the Dynatron 900+ (and accessories) as recommended below, according to the maximum
power of the communications equipment.
Separation distance (meters) according to frequency of transmitter
Rated maximum
output power of
transmitter
W
150 kHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2.5 GHz
0.01 0.12 0.12 0.23
0.1 0.37 0.37 0.74
1 1.2 1.2 2.3
10 3.7 3.7 7.4
100 12 12 23
For transmitters at a maximum output power listed above, the recommended separation distance ( d) in meters (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power
rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply to all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.