Dynatron 900+, Руководство оператора

Страница: 18 / 32

Dynatron 900
+™
14
S
ECTION
V
TECHNICAL INFORMATION
SUGGESTED MAINTENANCE SCHEDULE
SERVICE TO BE PERFORMED BY A TECHNICIAN
ANNUAL CALIBRATION
It is recommended that the Dynatron 900+ device be sent to the manufacturer for annual calibration.
MAINTENANCE PERFORMED BY USER
1. Inspect the Dynatron 900+ ropes/cables and connectors daily for wear and damage. Replace
accessories as needed.
2. If the device is dropped, or if damage is sustained due to lightning, severe power surge,
submersion in water, or other incident that could cause damage to electronic components, the
device must be examined by a Dynatronics’ technician before being returned to clinical use.
3. Inspect device air vents periodically to ensure air flow is not blocked. An ordinary household
vacuum hose may be used to clean dust from the external air vents.
1. Immediately report any device malfunction to Dynatronics’ Customer Service Department
(800) 874-6251.
CAUTION

Excluding rope and fuse replacement, refer servicing to qualified service personnel.

Clean only with a damp cloth. Cleaning the device with water or spraying liquid cleaning agents
on the device may cause damage to the unit and may endanger the life of the patient.

The unit may only be opened and serviced by authorized personnel.

Unplug the unit before opening.

Dynatronics recommends that the Dynatron 900+ be calibrated annually to ensure the unit is
working at peak performance.

When disposing of a Dynatron 900+ unit, comply with the laws and procedures required in your
area according to directives in ISO-14000.

Do not substitute unauthorized parts.
WARNING

Never clean the device while it is attached to a patient.

Keep all food and liquids away from the device and its accessories

If the device malfunctions, immediately press the Reset Key to release rope tension. When the
tension if completely released, turn off the device.
NOTE: BEFORE sending a device to Dynatronics for service, you must FIRST obtain a return
authorization number. Call your Dynatronics ’Representative or Dealer for assistance. If unable to
reach your Dynatronics’ Representative or Dealer, call Dynatronics’ Customer Service Department
at (800) 874-6251 and discuss any problems or required service to save time and ensure the machine
is returned to you as quickly as possible. See Section on the following page “Returning a Unit for
Repair.
WARNING: For continued protection against risk of fire, replace fuses only with type:
F 1.6A 250V (100V, 110V, 120V) ; F 0.8A 250V (220V, 230V, 240V)