Dynapac D.ONE Скачать руководство пользователя страница 102

Страница: 102 / 190

8.1 Preliminary remarks and safety notes

DANGER!
Danger to life caused by an operationally

unsafe machine!

–

The machine must only be serviced by quali-

fied and authorized personnel.

–

Follow the safety regulations for maintenance

work

Chapter 3.11 „Maintenance

work“ on page 39

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protec-

tion regulations must be followed when han-

dling fuels and lubricants

Chapter 3.4 „Han-

dling fuels and lubricants“ on page 25

Wear your personal protective equipment.

Do not touch hot components.

Park the machine on horizontal, level, firm ground.

Perform maintenance work only with the engine shut down.

Make sure that the engine cannot be accidentally started during

maintenance work.

Thoroughly clean the machine and engine before starting mainte-

nance work.

Depressurize hydraulic lines before working on them.

Always attach the articulation lock when working in the area of the

articulated joint.

Do not leave any tools or other objects that could cause damage in

or on the machine.

After maintenance work has been completed, dispose of fuels and

lubricants, filters, sealing elements and cleaning cloths in line with

environmental regulations.

After maintenance work is completed reinstall all protective

devices.

Close all maintenance flaps and doors after maintenance work has

been completed.

The terms right/left are always in relation to the

travel direction.

Maintenance – Preliminary remarks and safety notes

D.ONE

102

Содержание D.ONE































































































































































































Результаты поиска

Содержание D.ONE

Отзывы:

Похожие инструкции для D.ONE

Бренды по названию

Популярные бренды

Dynapac D.ONE, Руководство по эксплуатации

Результаты поиска

Содержание D.ONE

Отзывы:

Похожие инструкции для D.ONE

Бренды по названию

Популярные бренды