Dynapac CC7200, Инструкция по эксплуатации

Страница: 72 / 101

Maintenance - Maintenance schedule
4812158801_E.pdf 2018-04-03
General
Periodic maintenance should be carried out after the
number of hours specified. Use the daily, weekly etc.
periods where number of hours cannot be used.
Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease. Remove all dirt before filling, when checking
oils and fuel and when lubricating using oil or
grease.
The manufacturer’s instructions found in the
engine manual also apply. The manufacturer’s instructions found in the
engine manual also apply.
Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel. Specific maintenance and checks on diesel
engines must be carried out by the engine
supplier’s certified personnel.
Every 10 hours of operation (Daily)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
Before starting up for the first time on that day Before starting up for the first time on that day
19 Check the engine oil level Refer to the engine manual 19 Check the engine oil level Refer to the engine manual
14 Check the engine coolant level Refer to the engine manual 14 Check the engine coolant level Refer to the engine manual
14 Check for free circulation of cooling air 14 Check for free circulation of cooling air
20 Drain the fuel filter's water separator Refer to the engine manual 20 Drain the fuel filter's water separator Refer to the engine manual
Test the brakes Test the brakes
2 Check the sprinkler system 2 Check the sprinkler system
7 Check the scraper setting 7 Check the scraper setting
12 Check the hydraulic reservoir level 12 Check the hydraulic reservoir level
3 Refuel 3 Refuel
1 Fill the water tanks 1 Fill the water tanks
64