Dynapac CC7200, Инструкция по эксплуатации

Страница: 53 / 101

Operation
4812158801_E.pdf 2018-04-03
The warning lamp for the parking brake (5) should
remain on.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Driving
Operating the roller
1
3
2
4
5
6,7
9
10
11
12
Fig. Instrument panel
1. Emergency stop
2. Speed switch
3. Sprinkler switch
4. Temperature gauge, hydraulic fluid
5. Temperature gauge, engine
6,7, Diagnostics lamps
9. Parking brake knob
10. Full/dipped beam switch
11. Forward/reverse lever
12. Warning lamp, brakes
Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation. Under no circumstances is the machine to be
operated from the ground. The operator must be
seated inside the machine during all operation.
Set the speed control (2) in the desired working
position, right position during transport/asphalt
compaction and central position for loading/unloading.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (3). Use AUT to save water.
Make sure that the area in front of and behind the
roller is clear. Make sure that the area in front of and behind the
roller is clear.
Inactivate the parking brake switch (9) and check
that the parking brake warning lamp is off. Be
prepared that the roller may begin to roll, if it is on
a slope. Inactivate the parking brake switch (9) and check
that the parking brake warning lamp is off. Be
prepared that the roller may begin to roll, if it is on
a slope.
Carefully move the forward/reverse lever (11) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
45