Dynapac CC7200, Инструкция по эксплуатации

Страница: 38 / 101

Machine description
4812158801_E.pdf 2018-04-03
No Designation Symbol Function No Designation Symbol Function
36 Locking pedal Disengages the control table to turn to the left or right
operator's position. 36 Locking pedal Disengages the control table to turn to the left or right
operator's position.
37 Fuse boxes
(on the left side of the steering
column) Contains fuses for the electrical system. 37 Fuse boxes
(on the left side of the steering
column) Contains fuses for the electrical system.
38 Diagnostics, diesel engine When pressed, the error code is displayed with the fault
indicating lamps 40 and 41. 38 Diagnostics, diesel engine When pressed, the error code is displayed with the fault
indicating lamps 40 and 41.
39 Browse through engine error codes When turned to the right, browse forwards in the error
code list. 39 Browse through engine error codes When turned to the right, browse forwards in the error
code list.
When turned to the left, browse backwards in the error
code list. When turned to the left, browse backwards in the error
code list.
40 Fault indicating lamp (Yellow), less
serious fault Indicates a fault and shows the error code along with lamp
41. 40 Fault indicating lamp (Yellow), less
serious fault Indicates a fault and shows the error code along with lamp
41.
41 Fault indicating lamp (Red), serious
fault Shows the error code along with lamp 40.
If the lamp lights continuously, stop the diesel engine
immediately. 41 Fault indicating lamp (Red), serious
fault Shows the error code along with lamp 40.
If the lamp lights continuously, stop the diesel engine
immediately.
42 Information lamp, Delayed
regeneration The lamp comes on in the event of prevented (delayed)
regeneration. 42 Information lamp, Delayed
regeneration The lamp comes on in the event of prevented (delayed)
regeneration.
43 Regeneration switch with built-in
lamp In the left position, burnout is prevented and the lamp for
delayed regeneration (42) shines continuously. 43 Regeneration switch with built-in
lamp In the left position, burnout is prevented and the lamp for
delayed regeneration (42) shines continuously.
(the built-in lamp lights or flashes
when the system calls for
regeneration, depending on the
amount of soot) In the middle position, automatic regeneration of the DPF
filter (Auto mode) is performed (the built-in lamp lights or flashes
when the system calls for
regeneration, depending on the
amount of soot) In the middle position, automatic regeneration of the DPF
filter (Auto mode) is performed
Turning to the right starts manual regeneration of the DPF
filter. Turning to the right starts manual regeneration of the DPF
filter.
44 Warning lamp, High exhaust
temperature The lamp lights in the event of high exhaust fume
temperature. 44 Warning lamp, High exhaust
temperature The lamp lights in the event of high exhaust fume
temperature.
30