Dynapac CC1000, Инструкция по эксплуатации

Страница: 73 / 116

Maintenance - Maintenance schedule
4812160801_D.pdf 2018-12-17
After the FIRST 50 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Action Comment Action Comment
6 Change the engine oil and oil filter Refer to the engine manual 6 Change the engine oil and oil filter Refer to the engine manual
12 Change the hydraulic fluid filter 12 Change the hydraulic fluid filter
Check the belt tension on the hydraulic pump drive belt Check the belt tension on the hydraulic pump drive belt
Every 50 hours of operation (Weekly)
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
7 Empty the air cleaner dust trap 7 Empty the air cleaner dust trap
11 Check rubber elements and bolted joints 11 Check rubber elements and bolted joints
Every 250 / 750 / 1250 / 1750 hours of operation
Refer to the contents to find the page number of the
sections referred to !
Pos.
in fig Action Comment Pos.
in fig Action Comment
7 Clean the air cleaner filter element, check that hoses
and connectors are tight 7 Clean the air cleaner filter element, check that hoses
and connectors are tight
4 Clean the outside of the radiator core. In dusty environments, as
necessary. 4 Clean the outside of the radiator core. In dusty environments, as
necessary.
2 Check lubrication of controls and pivots Lubricate as necessary 2 Check lubrication of controls and pivots Lubricate as necessary
5 Check fan belt tension and condition Replace where necessary 5 Check fan belt tension and condition Replace where necessary
6 Change the engine oil and oil filter Refer to the engine manual 6 Change the engine oil and oil filter Refer to the engine manual
65