Dynapac CC1000, Инструкция по эксплуатации

Страница: 39 / 116

Machine description
4812160801_D.pdf 2018-12-17
Function description
No Designation Symbol Function No Designation Symbol Function
1. Starter switch Positions 1-2: Shut off position, key can be removed. 1. Starter switch Positions 1-2: Shut off position, key can be removed.
Position 3a: All instruments and electric controls are
supplied with power. Position 3a: All instruments and electric controls are
supplied with power.
Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
activated in the next position. Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
activated in the next position.
Position 3c: Starter motor activation. Position 3c: Starter motor activation.
2. Engine speed
control Raise the lever and release it into the groove to the
left to set engine speed to operating speed. To
select idling speed, move the lever to the right and
downwards. 2. Engine speed
control Raise the lever and release it into the groove to the
left to set engine speed to operating speed. To
select idling speed, move the lever to the right and
downwards.
3. Emergency stop When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
Brace yourself for a sudden stop. 3. Emergency stop When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
Brace yourself for a sudden stop.
4. Vibration On/Off.
Switch Press once and release to switch vibration on. Press
again to switch the vibration off. 4. Vibration On/Off.
Switch Press once and release to switch vibration on. Press
again to switch the vibration off.
5. Handbook
compartment Pull up and open the top of the compartment for
access to handbooks. 5. Handbook
compartment Pull up and open the top of the compartment for
access to handbooks.
6. Forward/Reverse
lever The engine can only be started when the lever is in
neutral. The engine will not start if the
forward/reverse lever is not in the neutral position.
Direction of travel and speed of the roller is regulated
with the forward/reverse lever. Move the lever
forward to drive the roller forwards, etc.
The speed of the roller is proportional to the distance
of the lever from the neutral position. The further the
lever is from the neutral position, the higher the
speed. 6. Forward/Reverse
lever The engine can only be started when the lever is in
neutral. The engine will not start if the
forward/reverse lever is not in the neutral position.
Direction of travel and speed of the roller is regulated
with the forward/reverse lever. Move the lever
forward to drive the roller forwards, etc.
The speed of the roller is proportional to the distance
of the lever from the neutral position. The further the
lever is from the neutral position, the higher the
speed.
7. Seat switch Remain seated at all times when operating the roller.
If the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated
and the engine stops. 7. Seat switch Remain seated at all times when operating the roller.
If the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated
and the engine stops.
8. Fuse box (on
control column) Contains fuses for the electrical system. See under
the heading ‘Electrical system’ for a description of
fuse functions. 8. Fuse box (on
control column) Contains fuses for the electrical system. See under
the heading ‘Electrical system’ for a description of
fuse functions.
9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable 9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable
12. Sprinkler, switch Upper position = switching on of flow of water to
drum.
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
forward/reverse lever.
The flow of water can be controlled by means of the
sprinkler timer (13). 12. Sprinkler, switch Upper position = switching on of flow of water to
drum.
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
forward/reverse lever.
The flow of water can be controlled by means of the
sprinkler timer (13).
Watering off Watering off
AUTO
Water supply to drum via forward/reverse lever in
AUTO mode. The flow of water can be controlled by
means of the sprinkler timer (13).
AUTO
Water supply to drum via forward/reverse lever in
AUTO mode. The flow of water can be controlled by
means of the sprinkler timer (13).
31