Dynapac CC1000, Инструкция по эксплуатации, Страница: 16 / 116

Safety - when operating
4812160801_D.pdf 2018-12-17
order to maintain roller stability. Consider other
compaction methods such as remote-control or a
walk-behind roller close to steep slopes or where the
bearing strength of the substrate is unknown.
It is recommended that ROPS (Roll Over Protective
Structure) or a ROPS-approved cab is always used
when driving on slopes or unsafe ground. Always
wear a seat belt. It is recommended that ROPS (Roll Over Protective
Structure) or a ROPS-approved cab is always used
when driving on slopes or unsafe ground. Always
wear a seat belt.
Driving near edges
Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope. Never operate with roller outside the edge, if the
substrate does not have full bearing strength or is
close to a slope.
Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left. Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the
center of gravity moves to the right when you steer
to the left.
8