Dynapac CC1000 e, Инструкция по эксплуатации

Страница: 105 / 130

Maintenance, 10h
4812164901_A.pdf 2022-11-14
Sprinkler system/Drum
Cleaning of sprinkler nozzle
3
2
Fig. Nozzle
1. Nozzle
2. Gasket
3. Filter
1
Dismantle the blocked nozzle by hand.
Blow the nozzle (1) and fine filter (3) clean using
compressed air. Alternatively, fit replacement parts
and clean the blocked parts later on.
Nozzle Colour l/min (at 2.0
bar) gal/min (at
40 psi) Nozzle Colour l/min (at 2.0
bar) gal/min (at
40 psi)
Standard yellow 0.63 0.20 Standard yellow 0.63 0.20
Option blue 0.98 0.30 Option blue 0.98 0.30
Option red 1.31 0.40 Option red 1.31 0.40
Option brown 1.63 0.50 Option brown 1.63 0.50
After inspecting and carrying out any necessary
cleaning, start the system and check that it works.
When working with compressed air.
Use the following protective equipment: When working with compressed air.
Use the following protective equipment:
Eye protection Eye protection
Protective gloves Protective gloves
Ear protectors Ear protectors
Sprinkler system - Check, cleaning
Fig. Bay under the floor
1. Water filter
1
Check that the water filter (1) is not blocked. Clean
where necessary. Clean the water filter by unscrewing
the filter’s lower section, and clean the strainer and
filter housing. Reassemble in the reverse order.
95