Dynapac CC1000 e, Инструкция по эксплуатации

Страница: 49 / 130

Machine description
4812164901_A.pdf 2022-11-14
2
1
3
"ADJUSTMENTS"
CALIBRATION - service personnel only, requires a
PIN code.
The value of the number increases or decreases using
button 1 or 3 respectively.
Button 2 confirms the value and the indication moves
to the next number.
Control lever calibration
1. Move the control lever to its foremost position.
2. Press " Enter " (12) to save the value. The calibration
indication now moves to "NEUTRAL".
3. Move the control lever back to the neutral position.
4. Press " Enter " (12) to save the value. The calibration
indication now moves to "REVERSE".
5. Move the control lever back to the reverse position.
6. Press " Enter " (12) to save the value.
12
7. Press " Enter " (12) to save the value
in the control unit.
When calibrating the joystick, the values must always
be between the following limits:
Forward ( F ): 200 - 700
Neutral ( N ): 2200 - 2800
Reverse ( R ): 4200 - 4700
8. " OK " is shown at the bottom of the display when
saving is complete. " ERROR " is shown at the bottom
of the display if the values are outside of the
aforementioned permitted limits. Redo the calibration.
39