Command with FXS Gateway
Parameter Usages:
print current settings in
support
command.
-t38
to switch ON/OFF (1 = ON; 0 = OFF) T.38 fax ability. When T.38 ability is ON,
FXS Gateway will automatically defer codec (G.723 or G.729a) to T.38 when
FAX signal is detected.
Note:
it is not recommended to change the value in this command, only if users do know
well the application. This might cause incompatibility with other devices.
usr/config$ support -print
Special Voice function support manipulation
T.38(FAX) support : Disabled
usr/config$
Figure 19-30 support –print commend list
19.7.16 [tos]
IP Packet ToS(type of Service)/Differentiated Service configuration.
usr/config$ tos
IP Packet ToS(type of Service)/Differentiated Service configuration
Usage:
tos [-rtptype dscp]
tos [-sigtype dscp]
tos -print
[-rtpreliab mode]
tos -print
Example:
tos -rtptype 7 -sigtype 0
usr/config$
Figure 19-31 tos commend list
Parameter Usages:
-rtptype the packages of voice
-sigtype the package of call signal
Note:
The value of rtptype and sigtype is from 0 to 63.
Command List
19-31
