FXS Gateway Overview
LABEL DESCRIPTION
information and configuration.
Commit Data
This link takes you to a screen where you can click save your changes to
the non-volatile memory.
Reboot System
This link takes you to a screen where you can click to reboot FXS
Gateway.
2.5 Saving
Your
Configuration
Click
OK
to save your changes back to the FXS Gateway volatile memory. The FXS Gateway
loses these changes if it is turned off or loses power, so use the
Commit Data
link on the
navigation panel to the left to save your changes to the non-volatile memory when your are done
configuring.
2.6 Navigating the Web Configurator
The web configurator uses one level. For example, to configure
Network Interface
,
click the
link on the navigation panel to open the configuration screen.
Figure 2-2 Network Interface Screen
Web Configuration with FXS Introduction
2-3
