Command with FXS Gateway
Figure 19-24 sip –print commend list
19.7.13 [security]
This command is used to configure the account information included username and password
obtained from the service provider
usr/config$ security
Secuirty information and configuration
Usage:
security [-name username] [-pwd password]
security -print
-print Display system account information and configuration.
-line Specify which line number you want to set the account.
-name Specify user name.
-pwd Specify password.
Example:
security -line 1 -name 1001 -pwd 1001
usr/config$
Figure 19-25 security Commend List
Parameter Usages:
print current setting in security command.
-line
Specify which line number you want to set into the account
Note:
If you have only one account, you can set into line1 or line2 using this parameter.
For example, if you set the account into line1, line1 can accept incoming calls.
-name
Specify the username of your account information.
-pwdd
Specify the password of your account information.
usr/config$ security -print
Line1 account information
Username : 1001
Password : nil
usr/config$
Figure 19-26 security –print commend list
Command List
19-27
