Command with FXS Gateway
Chapter 19
Command List
This section introduces the command line interface and lists all of the commands.
19.1
Hyper Terminal Setting
A terminal emulator is needed when using RS-232 port to configure FXS Gateway. There are
kinds of terminal emulator software. Here, we use Microsoft HyperTerminal to depict how to set
up terminal emulator:
Step 1.
Execute the Hyper Terminal program, and then the following windows will pop-up
on the screen. (START Program files Accessories Communication Hyper
Terminal)
Figure 19-1 Connection Description
Step 2.
Define a name such as
voip
for this new connection.
Step 3.
After pressing OK button, the next window appear, and then choose COM1/2 Port,
which you are going to use.
Command List
19-1
