FXS Gateway Overview
Chapter 3
Initial Configuration
This Chapter covers the basic configuration needed to set up and use the FXS Gateway. Refer
to the other part describes about individual fields within screens.
3.1 Initial Configuration Overview
This chapter describes the procedure for the initial configuration of the FXS Gateway. Refer to
the relevant chapters in this
User’s Guide
for descriptions of the fields and buttons within
individual screens.
3.2 General
Configuration
The FXS Gateway the factory with a default IP address of 10.1.1.3 and a subnet mask of
255.0.0.0.
3.3 Static IP address
Step 1.
Configuration the FXS Gateway IP address. Click
Network Interface
on the
navigation panel. In the
Network Interface
screen, type a new IP address, subnet
mask and the default routing gateway (e.g. IP Address: 192.168.4.71, Subnet mask:
255.255.0.0, Default routing gateway: 192.168.1.254) and click the
OK
button.
Figure 3-1 Network Interface
Step 2.
Click
Commit Data
on the navigation panel. In the
Commit Configuration Data
Initial Configuration
3-1
