Page 30 of 32 Embedded Solutions
Specifications
Logic Interfaces:
IP Logic Interface, PCI Interface -33 MHz. 32 bit, universal signaling
Access types:
IO, ID, MEM, INT IP Spaces supported via PCI bus accesses
CLK rates supported:
8 MHz or 32 MHz slot by slot selectable. 33 MHz. PCI
Software Interface:
Control Registers, and Installed IP. Programming procedure
documented in this manual
Access Modes:
LW, Word or Byte to IP registers LW can be converted to two word
accesses or as a LW to a 32 bit IP. LW to Internal PCI Interface Control
registers. Bus error detection and handling.
Access Time:
Typical access time with 32 MHz. IP and double access mode is 500 nS.
Interrupt:
2 per IP slot with separate enables., Programmable Bus error interrupt
DMA:
No DMA Support implemented at this time
Onboard Options:
All Options are Software Programmable
Interface:
50 pin Header Connectors with differentially routed, controlled
impedance, matched length per connector. Option for ejectors.
Dimensions:
Full length PCI board. With front bezel and rear mounting bracket.
Construction:
High Temp ROHS compliant FR4 Multi-Layer Printed Circuit, Through
Hole and Surface Mount Components.
Power:
RF filtered and fused to each IP slot. Resettable “self healing”
fuses.
User
8 position software readable switch
8 software controllable LED's
Other LED
LED's (4) monitored power (±12,5, 3.3) LED’s (5) used to show
IP acknowledge to access – 1 per position.
Slots
5 single wide IP slots with double wide and 32 bit capability in
slot pairs B/C and D/E
Temperature Range
-40C
ó
+85C Components Standard
Temperature Coefficient:
2.17 W/oC for uniform heat across Carrier
MTBF
1,099,222 Hrs. GB 25C
