BlueWave® MX-Series 1 Channel Curing Systems User Guide
31
Administrator Boot Mode
Setting the boot mode to “Administrator” will cause the Controller to enter the Admin
Mode immediately following power-up.
The administrator password may be accessed
by pressing the Settings Button followed by the User Button. The password is entered
and confirmed in the password screen via the on-screen QWERTY keyboard. The
password field accepts alfa-numeric characters up to a 12-character maximum. Pressing
the Return Button will save the current settings and return to the previous screen; the
Back Button will return the user to the previous screen without saving any change.
When in Production Mode, to return to Administrator Mode select “PRODUCTION” and
enter password
.
Production Boot Mode
Setting Boot Mode to “Production” will cause the
Controller to enter Production Mode
immediately after power-up; no password will be required.
System Information
The System Information Screen can be accessed by pressing the Information Button in
the top left corner of the Production or Admin Screens. Information such as the
controller model number and the serial number, firmware revision, and run hours for
the Emitter can be found here. You can also access the Alarm Screen.
