BlueWave® MX-Series 1 Channel Curing Systems User Guide
17
Unpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage
immediately. Open each box and check for equipment damage. If parts are damaged,
notify the shipper and submit a claim for the damaged parts. Contact Dymax so that
new parts can be shipped to you immediately.
The parts below are included in every package/order. If parts are missing from your
order, contact your local Dymax representative or Dymax Customer Support to resolve
the problem.
Parts Included
Controller
LED Emitter
Controller
Power Supply
Emitter Cable
Power Cord
Foot Pedal
Safety Glasses
BlueWave MX-Series 1CH User Guide
LED Emitter Assembly
5-mm Lightguide Adapter (MX-150
Emitter Only)
System Setup
System Connections
NOTE: Although this product is designed with protection against ESD (Electrostatic
Discharge) it is recommended to take precautions against static when handling the
BlueWave MX-Series controller or LED emitter independently. Once these devices are
attached together through the interconnect cable, then the threat of ESD damage is
eliminated.
1.
Attach the Power Cord to the Power Cord Receptacle located on the
unit’s
back
panel (Figure 4).
2.
At the top of the
Controller’s Rear Panel,
there is a connector labeled
“Emitter”
(Figure 4). Connect one end of the Emitter Cable to this connector and the other end
to the Emitter.
