SmartVue Operator’s Manual
6
10-0004-R13
2.4
The Main Menu
Pressing the MENU button on the
Meter screen will display the Main Menu shown in
Figure 2-6. From here you can navigate the SmartVue’s various menus and configuration
screens. A block diagram showing the menu hierarchy is shown in Figure 2-7. A
summary of the
Main Menu items is listed in Table 2-2.
Figure 2-6 The Main Menu screen
Table 2-2 The Main Menu
Main Menu Button
Description
Configure I/O
Allows configuration of the default settings for all of the SmartVue’s
inputs and which multipurpose I/O points will be used for outputs. It
also provides access to the 4-20mA calibration and logic threshold
settings.
Set Outputs
Provides options for assigning one for more of the SmartVue’s
outputs to a process and setting output scaling factors.
Processes
Displays a menu of currently assigned and/or disabled processes
that you can configure to use a SmartVue input.
Communications
Displays a menu that allows various communications protocols to be
configured including Ethernet and J1939-11.
Control Processes
Displays a menu of currently assigned and/or disabled control
processes that you can configure to use a SmartVue input.
SmartVue
Provides access to the password protection system, display
configuration, data monitoring, and the firmware uploading feature.
Meters
Allows you to assign a process to a meter for display on the Meter
Screen. It also allows configuration for data averaging, and meter
limit indicators.
File System
Displays a menu of file system operations allowing you to save your
current configuration changes or load a preconfigured set of
processes, meters, and I/O configuration settings. Note: if you load
the default settings and then press Save Settings your own settings
will be overwritten with the built-in defaults.
Run / Stop
Provides options for controlling the SmartVue’s operational modes
for processes and outputs.
