MesCom
– Workshop Manual – D6000/i14/V10
© Dycon Ltd 2014
-
56
7.7.24
RINGMODE
RING actions configuration.
The value should be the sum of the options that should be active.
Options
1
– Ignore all incoming calls and connection attempts.
2
– Reserved.
4
– Allow output changing by calling MesCom from SMS users’ phone number.
8
– Respond to a call from SMS users’ phone number with SMS of current input status.
16
– Hang up on incoming calls and call the programmed host.
32
– Allow incoming calls from unknown phone numbers (you are advised to set 16 also).
64
– Send status report to all users if button is held for 5 seconds.
128
– Create status report as part of routine log interval, see OPTION LOGINT.
Factory default: 28 (allow output, status and ringback)
9876 OPTION RINGMODE 16
7.7.25
CMDMODE
Command processing options.
WARNING
- should you disable all command methods, the MesCom is only recoverable with
a factory reset.
The value should be the sum of the options that should be active.
Options
1
– Disable commands via SMS.
2
– Reserved
4
– Do not ask for settings from data concentration servers.
8
– Disable commands from terminal.
16
– Disable commands from servers (this will disable FETCH command).
32
– Do not send a response to commands.
64
– Allow SMS from unknown numbers.
128
– Make START command administrator use only.
Factory default: 6 (allow SMS, terminal, Host)
9876 OPTION CMDMODE 0
7.7.26
MSGTIME
Packet wait time - maximum time to wait for response to a message packet in a call. The call
will be aborted if this time is reached.
Value in seconds: minimum 0s, maximum 65535s (approximately 1 month).
Value of zero disables the timeout.
Factory default: 30 seconds
9876 OPTION CMDEXP 60
