Dycon D6000 MesCom Скачать руководство пользователя страница 28

Страница: 28 / 72

MesCom

– Workshop Manual – D6000/i14/V10

7.2.6 ADDNUM

Add a user to the subscribed list.

Access Level:
Administrator

9876 ADDNUM <address> <password> <level> <format> <transport> <username>

The address of the user - for SMS users this is
their number phone.

ALL supported: No

<password> Give the user a password

default: last 4 digits of IMEI

1 user per command

<level>

Specify users access level
default: Read Only

The message output format
Default: standard

What method to send the message on
Default: dependant on address given

<username> Specify a username only used by some server

systems

9876 ADDNUM

Add the sender

’s number to the users list

MesCom: ADDNUM Successful 04/04/12,16:15:25

9876 447xxxxxxxxx
newpassword 6 12

Add the number to the contact list with a password of
“newpassword”, with administrator level access and the
“short” message format.

MesCom: ADDNUM Successful 04/04/12,16:15:25

9876 447xxxxxxxxx

Add the number to the contact list with default settings

MesCom: ADDNUM Successful 04/04/12,16:15:25

Notes

See User section for more detail about the parameters.

The subscribed user can be viewed with the VIEW USER ALL command.

The MesCom supports a limited number of users - when this limit is reached
the ADDNUM command will return a failed message.

If any of the parameters are not valid, then a fail message will be returned by
the MesCom.

All parameters can be omitted, this will add the sender

’s number. This will

only work if no currently subscribed users have Administrators access.

Содержание D6000 MesCom









































































Результаты поиска

Содержание D6000 MesCom

Отзывы:

Похожие инструкции для D6000 MesCom

Бренды по названию

Популярные бренды

Dycon D6000 MesCom, Руководство по ремонту

Результаты поиска

Содержание D6000 MesCom

Отзывы:

Похожие инструкции для D6000 MesCom

Бренды по названию

Популярные бренды